« ソリューションエンジンがやって来た! | トップページ | ケースに入れましょ! »

2007年9月11日 (火)

とりあえずLinux

とりあえず!と言うほどあっさり動くものでもなくて、音源以外は動いているように見えるスナップショットなのです。
video、ether、フラッシュ上のjffs2は大丈夫そうですが、USBとSATAは怪しいですね。。
いちど、ここまで動いたとこで、すこし整理をしましょ!

以下 スナップショット

HITACHI SE03 SH4A Linux BIOS Ver2.04

Copyright (C) 2001-2006 XXXX XXXXX
Command? r
zImage Load ............END
Linux version 2.6.20.11 (root@localhost.localdomain) (gcc ·Å·vflrÅ u–.4.4) #315
PREEMPT Tue Sep 11 18:09:59 JST 2007
Built 1 zonelists. Total pages: 32512
Kernel command line: console=ttySC0,9600 rootfstype=jffs2
PID hash table entries: 512 (order: 9, 2048 bytes)
Interval = 83333
Using tmu for system timer
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 126848k/131072k available (2668k kernel code, 4104k reserved, 95k data,
112k init)
PVR=10200a00 CVR=73440010 PRR=00000920
I-cache : n_ways=4 n_sets=256 way_incr=8192
I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
D-cache : n_ways=4 n_sets=256 way_incr=8192
D-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
Mount-cache hash table entries: 512
CPU: SH7780
PCI: Using configuration type 1
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Autoconfig PCI channel 0x882ad21c
Scanning bus 00, I/O 0xfe400000:0xfe800000, Mem 0xfd000000:0xfe000000
00:02.0 Class 0180: 1095:3512 (rev 01)
I/O at 0xfe400000 [size=0x8]
I/O at 0xfe400008 [size=0x4]
I/O at 0xfe400010 [size=0x8]
I/O at 0xfe400018 [size=0x4]
I/O at 0xfe400020 [size=0x10]
Mem at 0xfd000000 [size=0x200]
00:03.0 Class 0c03: 1033:0035 (rev 43)
Mem at 0xfd001000 [size=0x1000]
00:03.1 Class 0c03: 1033:0035 (rev 43)
Mem at 0xfd002000 [size=0x1000]
00:04.0 Class 0600: 1912:0002
I/O at 0xfe400100 [size=0x100]
Mem at 0x00000000 [size=0x8000000]
Mem at 0x08000000 [size=0x100000]
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Console: switching to colour frame buffer device 80x30
Silicon Motion, Inc. SM501 mode 640x480-16 Init Complete.
SuperH SCI(F) driver initialized
sh-sci: ttySC0 at MMIO 0xffe00000 (irq = 43) is a scif
sh-sci: ttySC1 at MMIO 0xffe10000 (irq = 79) is a scif
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
smc91x: IOADDR b8000000 doesn't match configuration (300).
smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre
eth0: SMC91C11xFD (rev 1) at b8000000 IRQ 14
eth0: Ethernet addr: 00:00:87:d6:0e:6b
SCSI Media Changer driver v0.25
sata_sil 0000:00:02.0: cache line size not set. Driver may not function
sata_sil 0000:00:02.0: Applying R_ERR on DMA activate FIS errata fix
ata1: SATA max UDMA/100 cmd 0xFD000080 ctl 0xFD00008A bmdma 0xFD000000 irq 67
ata2: SATA max UDMA/100 cmd 0xFD0000C0 ctl 0xFD0000CA bmdma 0xFD000008 irq 67
scsi0 : sata_sil
ata1: SATA link down (SStatus 0 SControl 310)
scsi1 : sata_sil
ata2: SATA link down (SStatus 0 SControl 310)
Probing for flash chips at 0x00000000:
Solutionengine_S3 FLASH: Found 2 x16 devices at 0x0 in 32-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
Solutionengine_S3 FLASH: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Solutionengine_S3: Flash at 0x00000000
Searching for RedBoot partition table in Solutionengine_S3 FLASH at offset 0xfe0
000
No RedBoot partition table detected in Solutionengine_S3 FLASH
Using configured partition at 0x00000000.
Creating 2 MTD partitions on "Solutionengine_S3 FLASH":
0x00000000-0x00200000 : "flash_boot"
0x00200000-0x01000000 : "Flash FS"
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 68, io mem 0xfd001000
ohci_hcd 0000:00:03.0: OHCI Unrecoverable Error, disabled
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: irq 68, io mem 0xfd002000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
push-switch: version 0.1.1 loaded
TCP cubic registered
VFS: Mounted root (jffs2 filesystem).
Freeing unused kernel memory: 112k freed
eth0: link down


Welcome to Litron(Linux + iTRON)

http://www.goodsoft.jp/litron

shlinux login: eth0: link up, 10Mbps, half-duplex, lpa 0x0021


Welcome to Litron(Linux + iTRON)

http://www.goodsoft.jp/litron

shlinux login: root
Password:
login[708]: root login on `ttySC0'

[root@shlinux /root]#

|

« ソリューションエンジンがやって来た! | トップページ | ケースに入れましょ! »

SolutionEngine SH7780」カテゴリの記事

コメント

コメントを書く



(ウェブ上には掲載しません)




トラックバック

この記事のトラックバックURL:
http://app.cocolog-nifty.com/t/trackback/166232/16417713

この記事へのトラックバック一覧です: とりあえずLinux:

« ソリューションエンジンがやって来た! | トップページ | ケースに入れましょ! »